Series 9608 / 9609 lowest* profile in the industry for LED light and LED backlight is released
|
 |
|
|
 Product Name |
|
Series 9608 / 9609 for LED light and LED backlight
Series 9608 (Left), Series 9609 (Right) |
| Outline |
|
Series 9608 / 9609 connectors are for LED light and LED backlight, which achieved 1.4mm of the industry-lowest* mating height so that the connectors would not hamper distribution of luminous intensity practically.
-Series 9608-
Three types, “JOINT (relay) type” connects modularized boards, “JUMPER (short-circuiting) type” supports a loop in an electrical circuit at the end of the circuit, and “Wire to Board type” is for connection to a power supply unit, are available.
-Series 9609-
This is a space saving type connector that could be mounted on a slim board derived from the weight saving of lighting fixtures. Two types, “JOINT (relay) type” connects modularized boards and “Wire to Board type” is for connection to a power supply unit, are available.
|
| Features |
|
-Serirs 9608-
| 1. |
The connector used around LEDs is designed so that they would not hamper distribution of luminous intensity, while achieving 1.4mm of the mating height, the lowest* in the industry. |
| 2. |
Plug connectors mounted on printed circuit boards are of the same shape in all types, which contributes the workability in the mounting process. Mating directions are well considered for their purpose; connectors of JOINT and JUMPER types are mated vertically, and the ones of Wire to Board type are horizontally. |
| 3. |
The floating structure is adopted in JOINT type, that absorbs misalignment of ±0.1mm on the long side of respective connectors (±0.1mm in total between the connected boards) to improve the contact reliability. |
| 4. |
The type of 1.2mm spacing between contacts besides 2.4mm spacing and types of other number of positions are available. |
| 5. |
Packaged in tape and reel: 2,000 pieces/reel (Plug connectors) |
| 6. |
RoHS compliant product |
-Serirs 9609-
| 1. |
The connector used around LEDs is designed so that they would not hamper distribution of luminous intensity, while achieving 1.4mm of the mating height, the lowest* in the industry. |
| 2. |
Receptacle connectors mounted on printed circuit boards are of the same shape for both types, which contributes the workability in the mounting process. |
| 3. |
The floating structure is adopted in JOINT type, that absorbs misalignment of ±0.1mm along the X-axis and ±0.2mm along the Y-axis of respective connectors (±0.2mm along X-axis and ±0.4mm along Y-axis in total between the connected boards) to improve the contact reliability. |
| 4. |
Packaged in tape and reel: 3,000 pieces/reel (Receptacle connectors) |
| 5. |
RoHS compliant product |
*Based on research by Kyocera Elco Corporation; as of Janualy, 2011
| Specification |
|
-Series 9608-
| No. of Positions |
2, 3 Pos. (Contact us for other pin counts.) |
| Stacking Height |
JOINT / JUMPER: 1.4mm, Wire to Board: 1.85mm |
| Pitch and Applicable Wire Sizes |
2.4mm Pitch: AWG #26 to 22 (Coated outer dia. 0.98 to 1.4mm)
1.2mm Pitch: AWG #30 to 28(Coated outer dia. 0.5 to 0.63mm) |
| Rated Current |
3A / Contact (any two positions)
Harness (AWG #24 to 22): 3A / Contact
Harness (AWG #30 to 26): 1A / Contact |
| Rated Voltage |
2.4mm Pitch: AC/DC 250V
1.2mm Pitch: AC/DC 125V |
| D.W.Voltage |
AC 500Vrms / min. |
| Contacting Length |
Horizontal: 0.8mm
Vertical: 0.4mm |
| Floating Structure |
±0.1mm along the X-axis and ±0.2mm along the Y-axis of respective connectors (±0.2mm along X-axis and ±0.4mm along Y-axis in total between the connected boards) |
| Creepage Distance of Insulation |
3.0mm Min. secured |
| Contact Material |
Copper alloy |
| Insulator Material |
Heat resistant plastic |
|
-Series 9609-
| No. of Positions |
1 Pos. |
| Stacking Height |
JOINT: 1.4mm, Wire to Board: 3.0mm |
| Applicable Wire Sizes |
UL10368 AWG #26 to 22 |
| Rated Current |
3A / Contact
Harness (AWG #24 to 22): 3A / Contact
Harness (AWG #26): 1A / Contact |
| Rated Voltage |
AC/DC 250V |
| D.W.Voltage |
AC 500Vrms / min. |
| Contacting Length |
Vertical: 0.3mm |
| Floating Structure |
±0.2mm along the Y-axis of respective connectors (±0.2mm along X-axis and ±0.4mm along Y-axis in total between the connected boards) |
| Creepage Distance of Insulation |
3.0mm Min. secured |
| Contact Material |
Copper alloy |
| Insulator Material |
Heat resistant plastic |
|
|
|
|
Top of page