| Series |
6293 |
| No. of Positions |
17 to 61 |
| Profile Height |
0.85mm |
| Contact Location |
Dual sided contact |
| Pitch |
0.3mm |
| Rated Current |
AC/DC 0.2A |
| Rated Voltage |
AC/DC 50V |
| Withstanding Voltage |
AC 250Vrms/min. |
| Applicable FPC thickness |
0.15mm |
|
|
 |
 |
 Outline |
|
Series 6293 connector is an FPC connector that is best suited to internal connections of electronic devices such as cellular phones, DSC’s, DVC’s, and etc. for which downsizing and multi-functioning are demanded.
As a 0.3mm-pitch dual-sided contact type connector, 0.85mm of the lowest profile in the field is achieved. This is an ultra-small sized and space-saving connector with 3.7mm deep of the mounting area and ready for the 0.15mm thick FPC. |
| Features |
|
| (1) |
This is a 0.3mm pitches, 0.85mm high, 3.7mm deep of the mounting area, ZIF, SMT, right-angle type of ultra low profile and space-saving connector. |
| (2) |
Adopting the dual-sided contact puts a less limit on laying the FPC. |
| (3) |
An actuator that retains and makes contact with the FPC is located on the opposite side of the FPC insertion slot, which realizes the easy and sure operation of the actuator that does not open by the external stress applied with the FPC laid. |
| (4) |
The connectors are delivered with the actuator open for better workability in
the site of customers. |
| (5) |
RoHS compliant product. |
| (6) |
Contact Material: Phosphor bronze |
| (7) |
Insulator Material: Heat resistance plastic |
| (8) |
Operating Temperature Range: -40 to +85°C |
| (9) |
Plating Specifications |
| Plating Code |
Contact Area |
Tail Area |
RoHS Compliance |
| 829+ |
Au(0.1µm Min.) |
Au(0.03 to 0.15µm) |
Yes |
|
|
|
| Related link |
|
|
|
 |
Japanese
Top of page